How To Replace Bathtub Faucet Handles

April 16, 2021

To change a bathtub faucet start by turning off the water supply to the faucet and opening the faucet to drain any leftover water inside of it. Replace the Phillips screw or Allen nut and tighten it.

How To Replace A Bathtub Faucet The Home Depot

Wiggle the handle and pull it off.

How to replace bathtub faucet handles. Pull the handle off the faucet. Thread the spout onto the spout plumbing until it is hand tight. Remove the handle securing screw with a Phillips-head screwdriver or Allen wrench depending on the screw head.

Grab the packaging nut between the pliers jaws and turn it counter-clockwise until it comes off. Removing bathtub faucet handles is essentially the same whether you have a one- or two-handled design. Line up the screw at the back and tighten it down so the escutcheon does not move.

Begin by using a flat-head screwdriver to pry off the handles plastic cover also called the plastic insert or index. Learn how to easily replace a two-handle faucet with this straight forward step-by-step video tutorial from Delta Faucet. Once the faucet is in the mounting holes insert a washer over each tailpipe and then twist on the nuts by hand.

Slide it onto the stem. Then place the packaging nut in a safe place outside the tub. Next unscrew the faucet stem and remove it so you can take it to a hardware store to find a matching replacement.

4 Valve Stem Youll need to remove the valve stem to repair the faucet handle. Insert the new faucet. Ad Search Thousands of Job Openings in London Get Hired.

Match the tailpipes and valves with the proper holes and place the faucet into position. Step 4 Wrap Teflon plumbers tape around the threads of the spout plumbing and the shower arm. Always a good deal.

Ad Search Thousands of Job Openings in London Get Hired. Twist it completely to the on position and back off to make sure it is positioned properly. Orient the new handle so the notches line up with those on the valve stem.

Unscrew the handle screw with a flathead or Phillips-head screwdriver as needed. Then unscrew the faucet handles and remove them to expose the faucet stem underneath. Pull the handle toward you to remove it.

Remove the screw with a bathtub handle extractor or by turning the screwdriver counterclockwise. Always a good deal. Place the cover over the center of the tub faucet handle if your faucet is a knob type faucet.

Step 3 Slip the replacement handle over the faucet stem or cartridge and secure it to the faucet with the retaining screw. Hold the faucet in both hands and carefully set it into the mounting holes. Place the handle over the top of the valve so it sits on the escutcheon.

How To Replace Bathtub Faucet Handles Youtube